
Pool fence installation in metro Atlanta
Code-minded pool safety barriers — ornamental aluminum, steel, vinyl, chain link, and wood — with self-closing, self-latching gates, installed across metro Atlanta. We build to the barrier spec your pool needs; free on-site estimates.
Atlanta’s trusted pool fence company & safety specialists
Looking for a pool fence installer in Atlanta? FenceWorks of Georgia’s local pool fencing contractors have built code-minded pool barriers across metro Atlanta since 2006. A pool fence does one job above all others — it keeps young children and pets from reaching the water unsupervised — so we build a proper four-sided barrier with self-closing, self-latching gates, sized to the spec your pool needs. Ornamental aluminum is our go-to — rustproof, climb-resistant, and open so the water stays in view (more below). We build to the height, spacing, and gate requirements your pool must meet. (Comparing materials or budgeting? See our fence material guide and fence cost guide.)
Pool fences at a glance
- Height: pool barriers are generally at least 48 in (4 ft); some metro-Atlanta jurisdictions require 5 ft — confirm locally
- Openings: gaps small enough that a 4-inch sphere can’t pass; chain-link mesh 1¼ in or smaller
- Gates: self-closing and self-latching, swinging outward away from the pool, with a high latch release
- Best material: ornamental aluminum — rustproof, climb-resistant, and see-through so you can watch the water
- Pricing: quoted per project — material, height, length, and gates set the price
General safety guidance — pool codes and HOA rules vary by city and county, and your local building department has the final say. We build to your required spec.
Installing pool fences across metro Atlanta — including Decatur, Dunwoody, Brookhaven, Chamblee, Duluth, and Peachtree Corners. We serve 27 cities, Smyrna to Dacula and beyond.
Ornamental aluminum & smooth-top aluminum pool fences
For most backyard pools we recommend powder-coated ornamental aluminum. It won’t rust or corrode from splash and pool chemicals, its narrow vertical pickets leave no horizontal footholds for a child to climb, and the open design keeps the water in clear view from the house. Prefer an uninterrupted line? A smooth top aluminum fence — the flat-top profile pictured below — is the clean, modern look many Atlanta pool decks choose, and the aluminum pool fencing setup we install most. It comes in black, bronze, and white, in the heights your pool code calls for, and it racks to follow a sloped yard. More on our aluminum fences →


Premium pool fence materials in Atlanta, GA
Aluminum is our go-to, but we install the full range of pool fence materials — the right one depends on whether you want to see through to the water, add privacy, or keep the budget down. We install all of these to your required pool spec — with any of them, the essentials are small enough openings and a self-closing, self-latching gate.
Steel pool fence installation & wrought iron
The same open, climb-resistant sightlines as aluminum with a heavier wrought-iron look, powder-coated to hold up to Georgia weather — our pick for estates and high-end pool enclosures.
Vinyl pool fencing options
Water-resistant and low-maintenance — it won’t rot, rust, or corrode from splash and pool chemicals. Available in open-picket or privacy styles.
Chain link
The economical open-weave option, with mesh sized to keep openings small; add privacy slats if you’d rather screen the pool from view.
Wood
Privacy and a natural look. Keep the horizontal rails on the pool side so they can’t be used as a ladder, and plan on upkeep against poolside moisture.

Residential & commercial pool fencing in Atlanta
Residential pool fencing in Atlanta backyards is most of what we build, but commercial pool fencing follows the same logic at a bigger scale. Apartment and townhome communities, hotels, swim clubs, and neighborhood community pools all need durable perimeter barriers with self-closing, self-latching gates — often taller, with heavier-duty hardware and wider service gates for maintenance access.
Property managers and HOA boards come to us with a spec from their code official or insurer, and we build to it — ornamental aluminum and steel are the usual picks for multi-family and commercial pool decks, for the same reasons they win in backyards: no rust, no footholds, clear sightlines to the water.
Child-resistant pool fence standards & gate requirements
A pool fence is a life-safety barrier first and a landscape feature second. Looking for code-compliant pool fence installation in Georgia? The child-resistant guidelines below come from U.S. CPSC pool-barrier guidance and the International Swimming Pool & Spa Code (ISPSC) that Georgia has adopted — treat them as a general starting point. Your city or county code and your HOA may be stricter, and the local building department has the final word — every Atlanta pool safety fence installation we build follows the spec you give us.
| Safety parameter | Standard requirement | How we build |
|---|---|---|
| Minimum height | 48 inches (4 ft), with some jurisdictions requiring 5 ft | Custom-built to the height your local code calls for |
| Picket / mesh openings | Nothing a 4-inch sphere can pass; chain-link mesh 1¼ in or smaller | Picket spacing and mesh sized to prevent child entry |
| Gate mechanics | Self-closing, self-latching, opening outward away from the pool | Installed as standard, with high latch releases (~54 in) |
| Climb resistance | No horizontal mid-rails or climbable footholds on the outside | Flush bottoms, pool-side rails, and equipment kept clear |
General guidance only — confirm current requirements with your local building department and HOA before you build; see our Georgia fence laws guide. A fence is a barrier, never a substitute for adult supervision.
Per project
Quoted On-Site
The cost of pool fence installation in Atlanta is quoted per project rather than at a flat per-foot rate — material, height, length, and the number of gates all move the price, and ornamental aluminum sits in the premium ($30+/ft) material tier. You get a free, itemized on-site estimate, with financing available through Wisetack.
Ready to secure your pool?
Get a free on-site estimate and a clear, itemized quote — usually within the same week.
Why homeowners choose FenceWorks for pool fencing
Code-minded barriers, built to your spec and made to last through Georgia summers since 2006.
Built to your pool’s spec
We set the height, picket spacing, and self-closing, self-latching gates to the barrier your pool needs, and build every detail to the spec you give us.
Rustproof, climb-resistant aluminum
Our go-to poolside material is powder-coated aluminum — see the aluminum section above for why it wins poolside. We install steel, vinyl, chain link, and wood to the same barrier spec too.
Backed since 2006
Licensed, insured, and rated 4.9★ by 900+ metro-Atlanta neighbors, with a written workmanship warranty and the $10,000 TrustDALE Make It Right Guarantee.
How it works
From first call to finished fence — three simple steps.
Free on-site estimate
We walk your pool area, take measurements, and go over materials, gate placement, and the height, spacing, and HOA or permit requirements your pool has to meet.
A clear, itemized quote
You see exactly what drives the price — material, height, gates, and upgrades — usually within the same week. Financing is available through Wisetack.
Install day
Your crew sets the posts, builds the fence and hangs the self-closing, self-latching gates, hauls away the debris, and leaves your yard clean.
What neighbors say about their pool fences
4.9 · 900+ verified Google reviews — these from pool fence projects
★★★★★
Meyo installer did very good job to install our fence, and Cody was our sales representative from fence work he accommodate our all need what was required by the county regulations for the the pool. Thank you
— Manzoor Haque, Marietta
★★★★★
Fenceworks of GA did a fabulous job installing the new fence around our pool area. Luis and his crew did an amazing job! Very friendly, polite and professional. I’m impressed with the quality of work! A special thanks to Don for being so attentive when I had questions, and flexible when we had to push back the start date. I highly recommend Fenceworks!
— Jennifer Hayslip, Duluth
Verified Google reviews from FenceWorks pool-fence customers.
Atlanta pool fence installation FAQ
Quick answers on height, materials, gates, spacing, cost, and permits.
How tall does a pool fence need to be in Georgia?
As general guidance, residential pool barriers are typically at least 48 inches (4 feet) high, measured from the outside, and some metro-Atlanta jurisdictions require 5 feet. Codes and HOA rules vary and your local building department has the final say, so we build your fence to the height and barrier spec your pool requires.
Do I need a fence around my pool?
In most cases yes. A barrier around a residential pool is a safety essential and is commonly required by local code and by homeowners insurance. Requirements vary by city and county, so confirm with your building department — but regardless of the rule, a proper barrier is the most important safeguard against a young child reaching the water unsupervised.
What is the best material for a pool fence in Atlanta?
Ornamental aluminum is our go-to: it won’t rust from splash or pool chemicals, has no horizontal footholds to climb, and its open pickets let you keep the water in view. Steel, vinyl, chain link, and wood all work too — the right pick depends on whether you want see-through safety, added privacy, or a lower budget.
Do pool fence gates have to be self-closing and self-latching?
Yes. Pool gates should be self-closing and self-latching, swing outward away from the pool, and have the latch mounted high (commonly about 54 inches from the bottom) so a child cannot reach it. We install self-closing, self-latching gate hardware as standard on pool fences.
What spacing keeps a pool fence safe for small children?
Openings should be small enough that a 4-inch sphere cannot pass through, with the bottom close to the ground so a child cannot slip under. For chain link, the diamond mesh is generally 1¼ inches or smaller. We build to these opening limits so the barrier does its job.
How much does pool fence installation cost?
Pool fencing is quoted per project rather than at a flat per-foot rate, because material, height, length, and the number of gates all move the price, and ornamental aluminum sits in the premium material tier. We give free, itemized on-site estimates, and financing is available through Wisetack. See our fence cost guide for the full picture.
How long does a pool fence take to install?
Most residential pool fences go in within one to a few days once materials are on hand, depending on the length, material, gates, and site access. We give you a realistic timeline with your itemized quote.
Do you handle the pool fence permit and code inspection?
We build your fence to the barrier spec you need, but we don’t pull permits or sign off on code — that stays with you and your local building department or HOA. Tell us the height, spacing, and gate requirements your pool must meet and we build to them. Our Georgia fence laws guide is a good starting point.







